Automotive Exterior 


PT16976

PT16976 is a linear LED controller for automotive exterior lighting. The controller drives an external NPN transistor to regulate a current for LED lamps. The typical application of the device is a rear combination lamps for automotive. A single driver gives the user flexibility to add single channels to multichannel systems. LED brightness can be easily programmed using a single resistor in series with the NPN transistor. It gives the user the flexibility to use the device over a wide range of currents.

A single controller can drive multiple strings of LEDs. The controller provides a dedicated dimming function via the PWM input. Setback current limit function helps to reduce the device power consumption during overvoltage conditions.

Additional fault protection features include open load and short circuit protection, the controller is turned off when an open load or short circuit is detected.


FEATURES


● Automotive AEC-Q100, Grade 1(-40°C ~+125°C) Qualified

● Programmable LED Current Using a Single Resistor

● Constant Current Output for LED String Drive

● External NPN transistor Device for Wide Current Range

● Pulse Width Modulation (PWM) Control

● Negative Temperature Coefficient Current Control Option

● Open LED String Diagnostic

● Short−Circuit LED String Diagnostic

● Multiple LED String Control

● Overvoltage Set Back Power Limitation

● Package Type- SOP 8

APPLICATIONS


● Rear Combination Lamps (RCL)

● Daytime Running Lights (DRL)

● Turn Signal

● Center High Mounted Stop Lamps (CHMSL) Arrays

● Fog Lights

● General Linear Current LED Driver

資源下載

Documentation

TitleFileVersionDate
DatasheetPT16976.pdfV1.32022/11/1
EVB test reportPT16976 EVB test report_20241029.pdfV1.32022/11/1
DEMOPT16976_DEMO_20200909.pdf  

Tools

Application Note